Grabbed images are delivered as uint2 images.ĭesired color space and thus the number of image channels of the resulting HALCON image. In case of -1 the current bit depth of the camera is used. Number of bits per channel of the resulting HALCON image. Row coordinate of the upper left pixel within the desired image part.Ĭolumn coordinate of the upper left pixel within the desired image part. Height of the desired image part ('0' stands for the complete image). Width of the desired image part ('0' stands for the complete image). Resolution to a user-defined value smaller than 4 lines is only possible resolution: User defined vertical resolution is set.Resolution to a user-defined value smaller than 4 pixels is only possible
#LABVIEW 2013 ERROR 1303 FULL#
Settings, '1' for full resolution, '2' for half resolution and resolution: User defined horizontal resolution is set.Note that in case of an IEEE 1394 camera, the parameter 'PacketSize' is set to the maximum value during open_framegrabber. Pre-defined write-only parameters of the HALCON interface. Pre-defined read-only parameters of the HALCON interface. Pre-defined parameters of the HALCON interface. [' | device: | friendly_name: user_name: serial_number: Information about the HALCON pylon interface. Parameters for info_framegrabber Parameter The accuracy of the results is limited due to internal 16.16 fix-point arithmetic for 8 bit ( 0.255), and 24.8 fix-point arithmetic for 16 bit raw data. With M = 128 for 8 bit raw data, and M = 32768 for 16 bit raw data. Y'CbCr to 'rgb' (Note: gamma correction is not considered):.The used transformation algorithms are basic and optimized for speed.įollowing transformations from the camera color space (see also PFNC) to the interface color space (see also 'color_space' parameter in this document) are supported: The conversion is automatically applied for PFNC (Pixel Format Naming Convention) compatible cameras, when the color format delivered by the camera differs from the user defined format if set via the parameter 'color_space'. The HALCON pylon interface supports an internal color conversion performed in software. Make sure that your firewall settings allow connecting to the camera, Please note that you need administrator privileges to access the GigE.The HALCON base directory %HALCONROOT% you have chosen during the Interface, both DLLs should reside in bin\%HALCONARCH% within HALCON image acquisition interface hAcqpylon.dll or.USB3 Vision: Successfully installed pylon USB3 Vision driver. Camera Link: Successfully installed pylon Camera Link driver. Successfully installed pylon 1394 driver. Streaming Filter or High Performance driver. GigE Vision: Successfully installed pylon GigE Vision.Or newer that is also supported by the vendor-specific SDK,Īlso WoW64 (using 32-bit HALCON on 64-bit Windows).
#LABVIEW 2013 ERROR 1303 PC#
0 kommentar(er)
